Interior paint houses are a wonderful way to radically change the look of your rooms. The paint job is fairly labor intensive, but when done well will look like it was done by a professional.
If you are not a professional painter, you might make some mistakes doing the work which will result in problem areas.
To save some disappointments, it is best to treat any potential problems with the help of professional Interior Painters.
Mildew is a big problem in many areas and needs to be treated before applying the paint. If there is already this mold and to prevent this happening, it is just a matter of using a bleach and water solution of water to wash the surface.
The solution should be a ratio of 3 to 1 to three parts water to one part bleach. After applying the solution to the surface to paint, let it sit for a good fifteen minutes, then rinse thoroughly.
Use a paint that is rust-proof and use fans to keep air circulating. The new lower VOC paint products are especially good for the environment and to prevent mildew. Check labels before purchasing your paint.
Sometimes the old paint begins to blister or form small bubbles and they must be discarded and sanded to smooth the edges before applying new paint.
If blisters went all the way to the dry wall or bare wood, it means there is a problem with moisture and this must be addressed before repainting.
To avoid this problem in the future simply use a higher grade of paint and primer. Paint that is too thin or if applied too low or in the absence of primer was used on wood, the paint will tend to crack and flake.